Shawnee Pottery Deer Figurine Miniature Figure
May be a factory flaw, small flea bite by front left foot. No cracks or hairlines and no repairs. Please review Pictures
- Dimensions: 3 1/2" height
- Year: 1930's to 1950's
Colors: White, Teal, and Brown
*VINTAGE NOTE: Please remember that this item has already had a previous life. Therefore, there might be the occasional imperfection. Although I take great care to describe any flaws and provide all the correct information about the age and details about the vintage items, I'm not a expert antique dealer.
Oil paint that is applied over the glaze for decorative purposes after the final firing. As it is not protected by the glaze, it is susceptible to chipping and wear. Water will damage cold paint.
A fine network of cracks or crazing deliberately produced in a glaze to give it an antiqued appearance. The cracks are often accentuated by staining. Often used on reproduction pieces to fake aging.
Unintentional cracking of the glaze caused by unequal shrinkage of the clay body and the glaze due to the tension in cooling or delayed expansion of the body. Crazed pieces are generally rejected at the factory, but exposure to heat and/or moisture can cause crazing at a later time.
A transfer decoration, sometimes one or two colors, sometimes multicolored, which is printed on special emulsion-coated paper and then coated with plastic film. When ready to use, the plastic is peeled off with the decoration adhering to it and applied to the ware. In firing, the plastic burns away and the printed decoration melts into the glaze.
Ware with no glaze on the foot, the surface that actually touches the table.
Process of heat treatment of ceramic products for the purpose of securing resistance and permanency, hardening and strengthening of the product. Firing is also known as bisque firing, gloss firing and decoration firing.
Base of a piece of ware.
A thin layer of special glass used as a coating for biscuit. It may be clear, colored or opaque, or contain crystals that will melt and harden on the surface of a clay body during the gloss firing process. Its purpose is to make the porous body nonporous, to secure greater permanency and to beautify an object.
Early commercial kilns were shaped like beehives or bottles and were named according to their shape. In the 1920' s tunnel kilns were developed, in which ware was fired by being carried through on flat cars that moved very slowly. Modem kilns move ware by a conveyor system in a matter of hours.
Ware that can withstand the heat of an oven without being damaged and then can be used to serve the food that has been cooking in it. Usually categorized with Kitchenware.
Ware with imperfections from the manufacturing process that do not affect the usefulness of the piece. Depending on the extent of the imperfections, they could be sent either to a reclaim department, to an outlet for sale or to an outside decorator.
A three-pronged fire-clay support used under ware that is being fired.
Three marks left in the bottom of a glazed piece from the stilt.
Decoration on the body, later covered with transparent glaze.
Information obtained from: Sanford's Guide To McCoy Pottery by Martha & Steve Sanford